|Place of Origin:||China|
|Minimum Order Quantity:||1 pcs|
|Packaging Details:||Wooden case, Carton|
|Delivery Time:||In 30 days after get the value|
|Payment Terms:||T/T, L/C, D/P|
|Product Name:||Industrial Air Dryer For Compressor||Feature:||Long Life|
Blue Adsorption Compressed Air Dryer , Industrial Air Dryer For Compressor
As a complete system , the adsorption dryer has a prefilter (with automatic condensate drain), silencers and an integrated dust filter onboard providing maximum efficiency and operational safety. The adsorption dryer are produced for a wide range of applications and are delivered ready to connect and easy to install.
1. The full range of standard PLC controller. With Chinese and English operation interface, dynamic operation monitoring chart.
2. Pneumatic valves are all stainless steel, safe and durable.
3. Micro heat suction machine, stainless steel multi tube heater, eliminate pipe burning, high heating efficiency, heat insulation cover use high-grade insulation material, and external package of stainless steel sheet, compared to similar products more energy saving.
4. The volume of adsorbent is designed by large capacity, and the remaining amount is increased by 20% on the basis of standard. It ensures the dew point is stable and the service life of adsorbent is long.
|Shut-off Valve||Check Valve||Regeneration Valve||Pressure Gauge||Silencer||Electrical Heater|
|Intake Presssure||0.4-1.0Mpa||Intake Air Temp.||≤45℃|
|Dew point||-20 ℃ ~-40℃||Regeneration Gas||≤7%|
|Switching period||8Hours(Tunable)||Pressure drop||≤0.02Mpa|
|Max. Oil load in air intake:||0.01PPM|
Wet air enters the absorption dryer via bottom air intake, ﬂows to the check valve V1 and enters the absorption tower A, so that the water contents are absorbed by the absorbent in the tower. Then, the dried air passes by the check valve CV1, exhausted to the air supply station, while the partially dried air passes by the regeneration valve V5 for throttling and pressure decreasing, and ﬂows to the regeneration tower B after being heated by the electrical heater E1, activates the absorbent in the tower B, so that the waste gas ﬂows to the check valve V4 and the silencer MF, exhausted to the air. Once one cycle is ﬁnished, A, B and the check valve may be switched, so that tower A is for regeneration and tower B for absorption for the next cycle. The cycle is repeated for dry processing of the compressed air.
In delivery, the standard cycle is set of 4 hours, including 2 hours for absorption,
1.5 hours for regeneration and 0.5 hours for blasting till cold and pressure equalization. The heating temperature is 250℃. Since the regenerated air may be heated eclectically and ﬂows to the regeneration tower, thus the air consumption in generation may highly decreased.
|Model||Capacity(Nm³/min)||Input power( KW)||Power||Inlet/Outlet||Weight(kg)||Dimension(mm)|
Absorption dryer shall have pre-ﬁlter installed at the inlet, as direct ﬂow-in of liquid water to the absorption bed may largely decrease the absorption effects, or entering of the oil fog may shorten life cycle of the absorbent, or the absorbent may loose its absorption capability due to “oil poisoning”.
Contact Person: Zhang